Private 90-minute coaching and flat-rate repair on your own 3D printer — at your kitchen table or garage bench. Free diagnosis, always. Listed prices are the max — your written quote lands at or below.
FIX. TEACH. EMPOWER.
Free, 5–10 minutes. Tell us where you're stuck and what you want to walk away with — or show us the problem over video before anyone drives anywhere.
Evenings and weekends, anywhere in the OKC metro. You stay in your own space with your own setup. No hauling a printer across town.
Sessions end with your machine tuned and your next print running. Repairs end with a working printer and a receipt that matches the quote.
Classes teach a machine you don't own, in a room you had to drive to. Everything we do happens where your printer actually lives — so every setting we change, every habit we teach, every profile we tune is still working for you the next morning.
OKC core, Edmond, Nichols Hills, The Village
Moore, Yukon, Mustang, Midwest City, Del City
Norman, Guthrie, El Reno, Newcastle
One travel fee per visit — no matter how many jobs or sessions we do while we're there.
K-12 schools, teachers, librarians, and registered nonprofits get 25% off everything — sessions at $30, repair labor at $30/hr. That dusty printer in the corner of the STEM lab? That's literally our specialty.
Tell us what your printer is doing (or not doing). We'll review it and reply the same evening with what's wrong, exactly what it costs to fix, and available evening times — before you spend a dime. Prefer to talk? Call or text (405) 465-0752.
No fixed curriculum, no intro fluff. Every session is 90 minutes, in your home, on your printer — shaped by a quick call before we ever schedule.
5–10 minutes on the phone. Where are you now, what's frustrating you, what do you want to be able to do? Your answers become the session plan. If it turns out you need a repair instead of a lesson, we'll tell you that too — the diagnosis is free either way.
Slicing, maintenance, and finishing as one arc — three visits, a week apart, each building on the last. By the end, you run your printer instead of the other way around.
Like a good mechanic shop, every job has fixed book hours at $40/hr — and the number on this page is the ceiling. Easier machines book fewer hours, so your exact price (often the low end) comes with your free diagnosis, in writing, before we touch anything. If the job runs long, that's our problem — the price never moves up.
Fun fact: some of the newest printers are the cheapest to fix — a Bambu hotend swaps in minutes, so you pay the low end. Your free diagnosis tells you your exact number.
| Service | Time | Price |
|---|---|---|
| Targeted session — slicing, maintenance, or finishing | 90 min | $40 |
| Three-session bundle — all focus areas | 3 × 90 min | $100 |
| Follow-up session — same topic, returning customers | 60 min | $30 |
| Planning call & printer health check | — | FREE |
| Job | Book time | Price range |
|---|---|---|
| Nozzle replacement | 0.4–0.5 hr | $15–20 |
| PTFE / Bowden tube replacement | 0.25–0.5 hr | $10–20 |
| Clog clearing — cold pull / hotend teardown | 0.6–1.0 hr | $25–40 |
| Hotend assembly replacement | 0.6–1.0 hr | $25–40 |
| Extruder rebuild or replacement | 0.6–1.0 hr | $25–40 |
| Full toolhead replacement / upgrade | 1.25–2.0 hr | $50–80 |
| Job | Book time | Price range |
|---|---|---|
| Bed leveling + first-layer dial-in | 0.4–0.5 hr | $15–20 |
| Leveling sensor install or replacement | 0.75–1.0 hr | $30–40 |
| Build plate / bed replacement | 0.5–1.0 hr | $20–40 |
| Bed heater or bed thermistor replacement | 1.0–1.5 hr | $40–60 |
| Job | Book time | Price range |
|---|---|---|
| Belt replacement or re-tension (per axis) | 0.4–0.5 hr | $15–20 |
| Axis binding fix — rollers, eccentrics, rails | 0.75–1.0 hr | $30–40 |
| Stepper motor replacement | 0.6–1.0 hr | $25–40 |
| Lead screw replacement + Z sync | 0.6–1.0 hr | $25–40 |
| CoreXY belt path rebuild | 1.5–2.0 hr | $60–80 |
| Job | Book time | Price range |
|---|---|---|
| Hotend thermistor replacement | 0.6–1.0 hr | $25–40 |
| Heater cartridge replacement | 0.6–1.0 hr | $25–40 |
| Thermal error / "heating failed" repair | 1.0–1.5 hr | $40–60 |
| Power supply replacement | 0.6–1.0 hr | $25–40 |
| Mainboard replacement + firmware flash | 1.25–2.0 hr | $50–80 |
| Wiring repair — broken / pinched harness | 0.6–1.0 hr | $25–40 |
| Job | Book time | Price range |
|---|---|---|
| Firmware update / re-flash | 0.4–0.5 hr | $15–20 |
| Full calibration suite — flow, PID, input shaping | 1.0–1.5 hr | $40–60 |
| Slicer profiles tuned to your printer (3 materials) | 0.75–1.0 hr | $30–40 |
| Klipper install & configuration | 2.0–2.5 hr | $80–100 |
| Package | Book time | Price range |
|---|---|---|
| Full tune-up — clean, lube, tension, level, calibrate, test print | 1.1–1.5 hr | $45–60 |
| New printer setup — assemble, calibrate, first print, orientation | 1.5–2.0 hr | $60–80 |
| Resurrection — dead printer, full workup | quoted | max capped in writing |
| Item | Range | Fee |
|---|---|---|
| Zone 1 travel | 0–12 mi | FREE |
| Zone 2 travel | 12–22 mi | $10 |
| Zone 3 travel | 22–30 mi | $20 |
| Schools, teachers, librarians & nonprofits | everything | 25% off |
The listed price is the maximum — your written quote lands at or below it, and it never moves up, even if the job runs long. If we misdiagnose it, the re-visit is free. If we can't fix it, you pay nothing but parts already installed at your request.
Brands serviced: Bambu Lab · Creality · Elegoo · Anycubic · Sovol · Qidi · Flashforge · Snapmaker · Prusa · custom & Klipper builds
If it's not covered here, call or text (405) 465-0752 — or send a free diagnosis request and ask anything in the notes.